The Cat® 326 Excavator brings premium performance with simple-to-use technologies to boost your operator efficiencies. Combine these features with a new cab, longer maintenance intervals, and a power system that reduces fuel and you have a low-cost-per-unit-of-production excavator that’s perfect for medium to heavy-duty applications.
SPECEFICATIONS: ENGINE Engine Power - ISO 9249 201.0 HP Engine Model Cat C7.1 Engine Power - ISO 14396 202.0 HP Bore 4.0 in Stroke 5.0 in Displacement 428.0 in³ HYDRAULIC SYSTEM Main System - Maximum Flow 515 l/min (136 gal/min) Maximum Pressure - Equipment 5075.0 psi Maximum Pressure - Equipment - Lift Mode 5510.0 psi Maximum Pressure - Travel 5075.0 psi Maximum Pressure - Swing 4118.0 psi SWING MECHANISM Swing Speed 10.5 r/min Maximum Swing Torque 78182.0 ft•lbf WEIGHTS Operating Weight 57100.0 lb SERVICE REFILL CAPACITIES Fuel Tank Capacity 125.2 gal (US) Cooling System 6.6 gal (US) Engine Oil 6.6 gal (US) Swing Drive 2.6 gal (US) Final Drive - Each 1.5 gal (US) Hydraulic System - Including Tank 81.9 gal (US) Hydraulic Tank 38.8 gal (US) DEF Tank 10.8 gal (US) DIMENSIONS Boom Reach 5.9 m (19'4") Stick Reach 2.95 m (9'8") Bucket HD 1.54 m³ (2.01 yd³) Shipping Height - Top of Cab 9.84 ft Handrail Height 9.84 ft Shipping Length 33.0 ft Tail Swing Radius 9.84 ft Counterweight Clearance 1.44 ft Ground Clearance 3.48 ft Length to Center of Rollers 12.5 ft Track Gauge 8.5 ft Transport Width 10.5 ft WORKING RANGES & FORCES Maximum Digging Depth 22.38 ft Boom Reach 5.9 m (19'4") Stick Reach 2.95 m (9'8") Bucket HD 1.54 m³ (2.01 yd³) Maximum Reach at Ground Level 33.2 ft Maximum Cutting Height 31.63 ft Maximum Loading Height 21.72 ft Minimum Loading Height 7.84 ft Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 21.78 ft Maximum Vertical Wall Digging Depth 16.77 ft Bucket Digging Force - ISO 37318.0 lbf Stick Digging Force - ISO 27202.0 lbf
PERFORMANCE AND PRODUCTIVITY: • Up to 10% lower fuel consumption. An additional 5% reduction without productivity loss when using SMART mode. • 12% improved swing torque makes working on slopes easier. • Increase operating efficiency up to 45 percent with standard Cat Technologies that lower operator fatigue and your operating costs, including fuel consumption and daily maintenance. • C7.1 engine that meets emission standards. An after treatment system that requires no maintenance or downtime. • The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements. • Match the excavator to the job with power modes; let Smart mode automatically match engine and hydraulic power to digging conditions. • Advansys™ bucket tips increase penetration and improve cycle times. Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime. • Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments. • Available SmartBoom™ lets the boom freely travel up and down without using any pump flow so operators can focus on stick and bucket work. The benefits are reduced operator stress and reduced fuel consumption. (Not available in all regions. Consult your local dealer on availability.) • Don’t let the temperature stop you from working. The excavator has a standard high-ambient temperature capability of 52° C (125° F) with de-rate and cold start capability of –18° C (0° F). An optional –32° C (–25° F) cold start package is available.
TECHNOLOGY THAT GETS WORK DONE: • Boost productivity up to 45 percent versus traditional grading with standard Cat GRADE with 2D system – includes indicate-only and laser capability. • Standard Grade Assist: Stay on grade – simply and effortlessly – with single-lever digging. • Set your desired bucket angle and let Bucket Assist automatically maintain the angle in sloping, leveling, fine grading, and trenching applications. • Keep the tracks on ground in lifting and hard digging with Boom Assist. • Automatically stop excavator swing at operator-defined set points in truck loading and trenching applications with Swing Assist, which will help you use less effort and consume less fuel. • Standard Cat PAYLOAD on-board weighing system: Achieve precise load targets and increase loading efficiency with on-the-go weighing and real-time estimates of your payload without swinging. • Combine Payload with Vision Link® and remotely manage your production targets, now with the possibility to download on a USB stick. • Upgrade to optional Cat GRADE with Advanced 2D: Create and edit grade designs with ease on a second high-resolution 254 mm (10 in) touch screen monitor. • Upgrade to optional Cat GRADE with 3D: Create and edit designs with ease on a second high-resolution 254 mm (10 in) touch screen monitor. Use 3D designs and GNSS technology to assist the operator in reaching the desired grade faster and accurately.
WORK IN COMFORT: • Choose between Comfort, Deluxe and Premium cabs – all with automatic climate control. (Consult your local dealer on availability in your region.) • The Comfort cab is equipped with a mechanical suspension seat. The Deluxe seat is heated and air adjustable. The Premium seat is heated and cooled and adjusts automatically. • Tip up console on the Deluxe and Premium cab improves ingress/egress by approximately 45%. • Advanced viscous mounts reduce cab vibration up to 50 percent over previous excavator models. • Control the excavator comfortably with easy-to-reach controls all located in front of you. • Stow your gear with plenty of in-cab storage beneath and behind the seat and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided. • Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.
SIMPLE TO OPERATE: • Start the engine with a push button; use a Bluetooth key fob*, smartphone app, or the unique Operator ID function. • Program your power mode and joystick preferences using Operator ID; the excavator will remember what you set each time you go to work. • Navigate quickly on the standard high-resolution 203 mm (8 in) touchscreen monitor, or with the optional 254 mm (10 in) touchscreen monitor (available on the Deluxe and Premium cabs only), or with the aid of the jog dial control. • Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor. • Find the tool you need – even if it’s hidden beneath overgrowth or debris. The excavator’s onboard Bluetooth reader can locate any work tool equipped with Cat asset tracking devices up to a range of 60 m (200 ft).
LOWER MAINTENANCE COSTS: • Expect up to 20 percent less maintenance cost than the 326F/326D2 (savings calculated over 12,000 machine hours). • Do all daily maintenance at ground level. • Check engine oil level quickly and safely with the new ground-level engine oil dipstick; fill and check engine oil on top of the machine with a conveniently located second dipstick. • Track your excavator’s filter life and maintenance intervals via the in-cab monitor. • No required maintenance on the Cat Clean Emissions Module. • Change all fuel filters at a synchronized 1,000 hours – a 100 percent increase over the 326F/326D2 fuel filters. • Expect the new air intake filter with precleaner to last up to 1,000 hours – a 100 percent increase over the previous filter. • The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000 hour replacement interval – 50 percent longer than previous filter designs. • High-efficiency cooling fans run only when needed; you can program intervals so they automatically reverse to keep cores clean without interrupting your work. • S•O•S ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.
BUILT-IN SAFETY FEATURES: • Lift Assist helps you avoid tipping. With visual and auditory alerts, you’ll know if your load is within the excavator’s safe working range limits. • Access 100 percent of daily maintenance points from ground level – no need for you to climb on top of the excavator. • The standard ROPS cab meets ISO 12117-2:2008 requirements. • Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab pillars, larger windows, and a flat engine hood design. • The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position. • Ground-level shut-off switch stops all fuel to the engine when activated and shuts down the machine. • A rearview camera and a right-side-view camera*are standard. Upgrade to 360° visibility and you’ll easily visualize objects and personnel around the excavator in a single view. • New right service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping. • Optional boom and stick lowering check valves prevent reverse flow, keeping your front linkage securely in place should the hydraulic system unexpectedly lose power. • Brightly colored seatbelts allow easy recognition of properly utilized safety restraints.
326 STANDARD EQUIPMENT: CAB: • High-resolution 203 mm (8 in) LCD touchscreen monitor
CAT TECHNOLOGIES: • Cat GRADE with 2D (Optional on machines equipped with a Super Long Reach boom.) • 2D E-Fence (Optional on machines equipped with a Super Long Reach boom.) • Cat GRADE with Assist (Optional on machines equipped with a Super Long Reach boom.) • Cat Product Link™ • Cat PAYLOAD (Optional on machines equipped with a Super Long Reach boom.) • Remote Flash capability
ENGINE: • One-touch low idle with automatic engine speed control • Biodiesel capability up to B20 • Three selectable power modes • Auto engine idle shutdown • Reversing electric cooling fans • 52° C (125° F) high-ambient cooling capacity with de-rate • Double element air filter with integrated precleaner • –18° C (0° F) cold start capability
HYDRAULIC SYSTEM: • Boom and stick regeneration circuits • Boom and stick drift reduction valve • Auto two-speed travel • Auto hydraulic warm up
UNDERCARRIAGE AND STRUCTURES: • Tie-down points on base frame • 4600 kg (10,141 lb) counterweight
ELECTRICAL SYSTEM: • LED chassis light, left-hand/right-hand boom lights, cab lights • Two 1,000 CCA maintenance free batteries • Programmable time-delay LED working lights
SERVICE AND MAINTENANCE: • Ground-level and platform-level engine oil dipsticks • Sampling ports for Scheduled Oil Sampling (S•O•S)
SAFETY AND SECURITY: • Signaling/warning horn • Right-side-view camera • Right-hand handrail and hand hold • Lift Assist (Optional on machines equipped with a Super Long Reach boom.) • Rearview camera • Ground-level engine shutoff switch • Signaling/warning horn • Signaling/warning horn • Right-hand handrail and hand hold • Signaling/warning horn
326 OPTIONAL EQUIPMENT: CAB: • ROPS, standard sound suppression, air-adjustable seat with heat (Deluxe only) • ROPS, Comfort cab with mechanical seat suspension • High-resolution 254 mm (10 in) LCD touchscreen monitor • ROPS, advanced sound suppression, auto-adjustable seat with heat and air ventilation (Premium only)
CAT TECHNOLOGIES: • Cat GRADE with Advanced 2D (Optional on machines equipped with a Super Long Reach boom.) • Cat GRADE with 3D (Optional on machines equipped with a Super Long Reach boom.)
ENGINE: • –32° C (–25° F) cold start capability
HYDRAULIC SYSTEM: • Boom and stick lowering check valves • Medium-pressure circuit • Hammer return filter circuit • Combined Tool Control (two pump, one/two way high-pressure flow) • Quick coupler circuit
BOOMS AND STICKS: • 5.9 m (19'4") reach boom, 2.5 m (8'2") reach stick, long undercarriage (Long narrow undercarriage also available in Europe only.) • 5.9 m (19'4") reach boom, 3.6 m (11'10") reach stick, long undercarriage (North America only.) • 5.9 m (19'4") HD reach boom, 2.95 m (9'8") HD reach stick, long undercarriage (Europe and Japan only.) (Long narrow undercarriage also available in Europe only.) • 5.9 m (19'4") reach boom, 2.95 m (9'8") reach stick, long undercarriage (Long narrow undercarriage also available in Europe only.) • 2.8 m + 3.3 m (9'2" + 10'10") VA boom, 2.95 m (9'8") reach stick, long undercarriage (Europe only.) (Long narrow undercarriage also available in Europe only.) • 2.8 m + 3.3 m (9'2" + 10'10") VA boom, 2.5 m (8'2") reach stick, long undercarriage (Europe only.) (Long narrow undercarriage also available in Europe only.) • 10.2 m (33'6") SLR boom, 7.85 m (25'9") SLR stick, long undercarriage (Long narrow undercarriage also available in Europe only.)
UNDERCARRIAGE AND STRUCTURES: • 600 mm (24") triple grouser shoes • 700 mm (28") triple grouser shoes • 790 mm (31") triple grouser shoes • 900 mm (35") triple grouser shoes • 6700 kg (14,771 lb) counterweight
ELECTRICAL SYSTEM: • 360° lighting
SERVICE AND MAINTENANCE: • Electric refueling pump with auto shut off
SAFETY AND SECURITY: • 360° visibility (Requires 254 mm [10 in] monitor.)
### MULTI-PROCESSOR WITH DEMOLITION JAWS:
Discover Quality & Reliability: Embrace the Elegance of Japanese Used Cars all around the world
Japanese used carsalmost exported to worldwide, despite the high cost of transport,japanese used carsbuy& sell due to lo
1. Excavators Excavatorsare imperative and broadly utilized equipment in development industry.Their common reason is to
The Mitsubishi Super great is a series of durable heavy duty commercial truck produced by the popular and one of the mos
When medium duty commercial are tight demand in the market and there were not a lot to compete the latest boosting deman
The Mitsubishi Canter is a light commercial vehicle which is available on the Japanese market since the year 1962. Mean
When Mitsubishi 1977 settled, VW Golf has a real bestseller. The young company responded quickly and one year later a co
We are proud member of Japan Used Motor Vehicle Exporters Association (JUMVEA), its makes us Unique trusted supplier from Japan, worldwide satisfied customers. The office of JUMVEA located in Tokyo but members are covering almost all area in Japan. As JUMVEA we also cover most of the countries in the world for the exportation of the used motor vehicles.
Higashi Ibaraki-gun, Ibaraki Machi, Nagaoka 4070-2 Ibaraki-ken 311-3116 Japan
+81 29-293-6822
+81 29 293 7088
info@mumtazintl.com
trucks@mumtazintl.com
machine@mutazintl.com
suvs@mumtazintl.com
We highly recommend paying via Paypal because it's easier and faster! Also, there's NO HANDLING FEE for Paypal payments!
For more details on how to make payments via Paypal, please click here
