The Cat® 302 CR Mini Excavator delivers power and performance in a compact size to help you work in a wide range of applications.
ENGINE Engine Model C1.1 Net Power 19.2 HP Rated Net Power - 2,400 rpm - ISO 9249/EEC 80/1269 19.2 HP Bore 3.0 in Stroke 3.2 in Displacement 69.0 in³ Gross Power - ISO 14396 21.6 HP WEIGHTS Operating Weight 4861.0 lb Maximum Operating Weight with Cab 4861.0 lb Minimum Operating Weight with Canopy 4211.0 lb Note (2) Maximum Weight is based on steel tracks, canopy, operator, expandable undercarriage and full fuel tank. Maximum Operating Weight with Canopy 4568.0 lb Minimum Operating Weight with Cab 4502.0 lb Note (1) Minimum Weight is based on rubber tracks, canopy, operator, fixed undercarriage and full fuel tank. BLADE Height 8.9 in Width 42.9 in Note Expanded – 1300 mm (51 in) DIMENSIONS - STANDARD STICK Dig Depth 93.3 in Maximum Dig Height 139.8 in Track Belt/Shoe Width 9.8 in Tail Swing 29.5 in Boom Height - Shipping Position 42.1 in O/A Shipping Height 90.6 in Overall Shipping Length 153.5 in Maximum Blade Height 11.2 in Maximum Reach 161.8 in Track Width - Expanded 55.12 in Track Width - Retracted 42.9 in Boom Swing - Right 50.0 ° O/A Undercarriage Length 72.8 in Maximum Reach - Ground Level 159.1 in Swing Bearing - Height 17.4 in Stick Length 37.8 in Boom Swing - Left 65.0 ° Boom In Reach 65.4 in Maximum Dump Clearance 100.8 in Minimum Ground Clearance Below Undercarriage 5.9 in Maximum Blade Depth 11.6 in Vertical Wall 72.8 in WEIGHT INCREASE FROM MINIMUM CONFIGURATION Steel Tracks 132.0 lb Long Stick 15.0 lb Expandable Undercarriage 212.0 lb CERTIFICATION - CAB AND CANOPY Top Guard ISO 10262:1998 (Level I) Roll Over Protective Structure (ROPS) ISO 12117-2:2008 Tip Over Protective Structure (TOPS) ISO 12117:1997 DIMENSIONS - LONG STICK Track Belt/Shoe Width 9.8 in Tail Swing 29.5 in Maximum Dump Clearance 103.9 in Vertical Wall 76.4 in Boom In Reach 65.4 in O/A Shipping Height 90.6 in Maximum Blade Depth 11.6 in Track Width - Retracted 42.9 in Stick Length 45.7 in Boom Height - Shipping Position 40.2 in Maximum Reach 168.1 in Swing Bearing - Height 17.4 in Boom Swing - Right 50.0 ° Track Width - Expanded 55.12 in Boom Swing - Left 65.0 ° Dig Depth 101.2 in Maximum Dig Height 142.5 in O/A Undercarriage Length 72.8 in Maximum Blade Height 11.2 in Maximum Reach - Ground Level 165.7 in Overall Shipping Length 152.8 in Minimum Ground Clearance Below Undercarriage 5.9 in Note Overall Shipping Length depends on blade position during shipment. HYDRAULIC SYSTEM Pump Flow at 2,400 rpm 17.4 gal/min Digging Force - Stick - Standard 2540.3 lbf Auxiliary Circuit - Primary - Flow 8.7 gal/min Digging Force - Bucket 4406.3 lbf Auxiliary Circuit - Secondary - Pressure 3553.4 psi Operating Pressure - Travel 3553.4 psi Operating Pressure - Equipment 3553.4 psi Operating Pressure - Swing 2132.1 psi Digging Force - Stick - Long 2203.1 lbf Type Load Sensing Hydraulics with Variable Displacement Piston Pump Auxiliary Circuit - Primary - Pressure 3553.4 psi Auxiliary Circuit - Secondary - Flow 3.7 gal/min SWING SYSTEM Machine Swing Speed 9.8 r/min SOUND Average Exterior Sound Pressure (ISO 6395:2008) 93.0 dB(A) Note European Union Directive “2000/14/EC” Operator Sound Pressure (ISO 6396:2008) 73.0 dB(A) SERVICE REFILL CAPACITIES Cooling System 1.0 gal (US) Hydraulic Tank 4.8 gal (US) Hydraulic System 6.9 gal (US) Engine Oil 1.2 gal (US) Fuel Tank 6.9 gal (US) *TRAVEL SYSTEM Travel Speed - High 2.7 mile/h Travel Speed - Low 1.8 mile/h Maximum Traction Force - Low Speed 4496.2 lbf Maximum Traction Force - High Speed 2967.5 lbf Gradeability - Maximum 30 degrees Ground Pressure - Maximum Weight 3.9 psi Ground Pressure - Minimum Weight 3.4 psi
ALL DAY COMFORT: • Choose either a canopy or a sealed and pressurized cab equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.
EASY TO OPERATE: • Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.
STICK STEER TRAVEL MODE: • Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN: • Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.
SAFETY ON THE JOB SITE: • Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME: • Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab lets you reach additional service areas when needed.
LOWER OPERATING COSTS: • Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
302 CR STANDARD EQUIPMENT ENGINE • Power on Demand (not available in all regions) • Load Sensing/Flow Sharing Hydraulics • Fuel Water Separator • Automatic Two Speed Travel • Automatic Engine Shutdown • Variable Displacement Piston Pump • Cat C1.1 Engine (U.S. EPA Tier 4 Final/EU Stage V) • Automatic Engine Idle
HYDRAULICS • Auxiliary Hydraulic Lines • Auxiliary Line Quick Disconnects • Automatic Swing Brake • One and Two Way Auxiliary Flow • Continuous Auxiliary Flow • Smart Tech Electronic Pump • Accumulator
OPERATOR ENVIRONMENT • Machine Security – Standard Key with Pass Code or Push to Start with Fob • Bluetooth® Capable (Cab only) • Skylight • Cab Interior Light • Retractable High Visibility Seat Belt (75 mm/3 in) • Tilt-up Cab or Canopy • Washable Floor Mat • Travel Pedals and Levers • Top Guard – ISO 10262:1998 (Level I) • Cab or Canopy • Storage Pocket • TOPS – ISO 12117:1997 • Cab HVAC or Heat Only • Next Generation Stick Steer • Adjustable Wrist Rests • Machine 2-Point Lifting • Fabric or Vinyl Seat • ROPS – ISO 12117-2:2008 • Hydraulic Lockout – All Controls • Coat Hook • Next Generation Standard LCD Monitor • Cup Holder
UNDERCARRIAGE • Rubber Belt or Steel Track (250 mm/9.8 in wide) • Fixed or Expandable Undercarriage • Dozer Blade with Float • Tie Downs on Track Frame
BOOM, STICK AND LINKAGES • Standard Stick (960 mm/37.8 in) or Long Stick (1160 mm/45.7 in) • One Piece Boom (1850 mm/73 in) • Certified Lifting Eye (not available in all regions) • Thumb Ready (not available in all regions) • Front Shovel Capable (Pin-On/Manual Coupler/Hydraulic Coupler – not available in all regions)
ELECTRICAL • 12 Volt Battery • Maintenance Free Battery • Software (machine and monitor) • Warning Horn • 12 Volt Power Socket • Boom Light, Halogen • Pattern Changer
OPERATOR ENVIRONMENT • Mirrors Left and Right • Cab Radio
ELECTRICAL • Product Link™ • LED Boom Light • LED Front and Rear Lights • LED Front Lights • Battery Disconnect
OTHER • Water Jacket Heater • Eco Drain • Guard, Canopy • Attachments including Buckets, Augers and Hammers • Guard, Mesh • Travel Alarm (standard in some regions) • Quick Coupler Lines • Thumb Bracket (standard in some regions) • Secondary Auxiliaries • Bio Oil Capable • No Travel Pedals and Levers • Boom Lowering Check Valve • Stick Lowering Check Valve
DITCH CLEANING BUCKETS - MINI EXCAVATOR:
CAT MODELS: 302 CR4630lbs (2100kg) COMPITATOR MODELS: BOBCAT E204306lbs (1953kg)
Discover Quality & Reliability: Embrace the Elegance of Japanese Used Cars all around the world
Japanese used carsalmost exported to worldwide, despite the high cost of transport,japanese used carsbuy& sell due to lo
1. Excavators Excavatorsare imperative and broadly utilized equipment in development industry.Their common reason is to
The Mitsubishi Super great is a series of durable heavy duty commercial truck produced by the popular and one of the mos
When medium duty commercial are tight demand in the market and there were not a lot to compete the latest boosting deman
The Mitsubishi Canter is a light commercial vehicle which is available on the Japanese market since the year 1962. Mean
When Mitsubishi 1977 settled, VW Golf has a real bestseller. The young company responded quickly and one year later a co
We are proud member of Japan Used Motor Vehicle Exporters Association (JUMVEA), its makes us Unique trusted supplier from Japan, worldwide satisfied customers. The office of JUMVEA located in Tokyo but members are covering almost all area in Japan. As JUMVEA we also cover most of the countries in the world for the exportation of the used motor vehicles.
Higashi Ibaraki-gun, Ibaraki Machi, Nagaoka 4070-2 Ibaraki-ken 311-3116 Japan
+81 29-293-6822
+81 29 293 7088
info@mumtazintl.com
trucks@mumtazintl.com
machine@mutazintl.com
suvs@mumtazintl.com
We highly recommend paying via Paypal because it's easier and faster! Also, there's NO HANDLING FEE for Paypal payments!
For more details on how to make payments via Paypal, please click here
