The Cat® 301.7 CR Mini Excavator delivers power and performance in a compact size to help you work in a wide range of applications.
ENGINE Engine Model C1.1 Net Power 19.2 HP Bore 3.0 in Stroke 3.2 in Rated Net Power - 2,400 rpm - ISO 9249/EEC 80/1269 19.2 HP Gross Power - ISO 14396 21.6 HP Displacement 69.0 in³ WEIGHTS Operating Weight 4063.0 lb Minimum Operating Weight with Canopy 3937.0 lb Maximum Operating Weight with Canopy 4063.0 lb Note (2) Maximum Weight is based on steel tracks, canopy, operator, expandable undercarriage and full fuel tank. Note (1) Minimum Weight is based on rubber tracks, canopy, operator, expandable undercarriage and full fuel tank. BLADE Height 8.9 in Note Expanded – 1300 mm (51 in) Width 39.0 in DIMENSIONS - LONG STICK Tail Swing 25.6 in O/A Shipping Height 90.6 in Maximum Blade Height 10.6 in Minimum Ground Clearance Below Undercarriage 5.9 in O/A Undercarriage Length 62.6 in Boom Height - Shipping Position 40.9 in Maximum Dump Clearance 98.8 in Track Belt/Shoe Width 9.1 in Maximum Dig Height 137.4 in Track Width - Expanded 51.18 in Maximum Reach - Ground Level 159.8 in Swing Bearing - Height 17.4 in Boom Swing - Left 65.0 ° Stick Length 45.7 in Vertical Wall 74.4 in Track Width - Retracted 39.0 in Boom Swing - Right 50.0 ° Note Overall Shipping Length depends on blade position during shipment. Maximum Reach 162.6 in Boom In Reach 63.8 in Dig Depth 100.0 in Overall Shipping Length 141.3 in Maximum Blade Depth 10.4 in HYDRAULIC SYSTEM Operating Pressure - Equipment 3553.4 psi Operating Pressure - Swing 2132.1 psi Digging Force - Stick - Standard 2135.7 lbf Pump Flow at 2,400 rpm 17.4 gal/min Auxiliary Circuit - Primary - Pressure 3553.4 psi Digging Force - Bucket 3641.9 lbf Auxiliary Circuit - Secondary - Pressure 3553.4 psi Operating Pressure - Travel 3553.4 psi Type Load Sensing Hydraulics with Variable Displacement Piston Pump Auxiliary Circuit - Secondary - Flow 3.7 gal/min Auxiliary Circuit - Primary - Flow 8.7 gal/min Digging Force - Stick - Long 1865.9 lbf DIMENSIONS - STANDARD STICK Track Belt/Shoe Width 9.1 in Overall Shipping Length 142.5 in Track Width - Expanded 51.18 in O/A Undercarriage Length 62.6 in Maximum Reach - Ground Level 153.5 in Boom Height - Shipping Position 42.9 in Boom Swing - Left 65.0 ° Maximum Reach 156.3 in Maximum Blade Depth 10.4 in Dig Depth 92.5 in Maximum Dump Clearance 96.5 in Maximum Blade Height 10.6 in Tail Swing 25.6 in Boom In Reach 64.2 in Minimum Ground Clearance Below Undercarriage 5.9 in O/A Shipping Height 90.6 in Swing Bearing - Height 17.4 in Stick Length 37.8 in Vertical Wall 70.9 in Boom Swing - Right 50.0 ° Track Width - Retracted 39.0 in Maximum Dig Height 135.0 in TRAVEL SYSTEM Maximum Traction Force - High Speed 2675.2 lbf Travel Speed - High 2.7 mile/h Ground Pressure - Maximum Weight 4.2 psi Travel Speed - Low 1.8 mile/h Maximum Traction Force - Low Speed 4136.5 lbf Gradeability - Maximum 30 degrees Ground Pressure - Minimum Weight 4.0 psi SERVICE REFILL CAPACITIES Engine Oil 1.2 gal (US) Hydraulic Tank 4.8 gal (US) Fuel Tank 5.8 gal (US) Cooling System 1.0 gal (US) Hydraulic System 6.9 gal (US) SOUND Average Exterior Sound Pressure (ISO 6395:2008) 93.0 dB(A) Note European Union Directive “2000/14/EC” WEIGHT INCREASE FROM MINIMUM CONFIGURATION Steel Tracks 110.0 lb Long Stick 15.0 lb Expandable Undercarriage Standard SWING SYSTEM Machine Swing Speed 9.8 r/min *CERTIFICATION - CANOPY Roll Over Protective Structure (ROPS) ISO 12117-2:2008 Top Guard ISO 10262:1998 (Level I) Tip Over Protective Structure (TOPS) ISO 12117:1997
ALL DAY COMFORT: • Adjustable wrist rests and a suspension seat option help keep you working comfortably all day long.
EASY TO OPERATE: • Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.
STICK STEER TRAVEL MODE: • Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN: • Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.
SAFETY ON THE JOB SITE: • Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we've built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME: • Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up canopy lets you reach additional service areas when needed.
LOWER OPERATING COSTS: • Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
301.7 CR STANDARD EQUIPMENT ENGINE • Power on Demand (not available in all regions) • Automatic Engine Shutdown • Automatic Two Speed Travel • Cat C1.1 Engine (U.S. EPA Tier 4 Final/EU Stage V) • Variable Displacement Piston Pump • Automatic Engine Idle • Fuel Water Separator • Load Sensing/Flow Sharing Hydraulics
HYDRAULICS • Auxiliary Hydraulic Lines • One and Two Way Auxiliary Flow • Auxiliary Line Quick Disconnects • Accumulator • Smart Tech Electronic Pump • Continuous Auxiliary Flow • Automatic Swing Brake
OPERATOR ENVIRONMENT • Machine Security – Standard Key with Pass Code or Push to Start with Fob • Top Guard – ISO 10262:1998 (Level I) • Cup Holder • ROPS – ISO 12117-2:2008 • Vinyl Seat (with or without suspension) • Canopy Only • Adjustable Wrist Rests • Travel Pedals and Levers • Hydraulic Lockout – All Controls • Coat Hook • TOPS – ISO 12117:1997 • Washable Floor Mat • Next Generation Stick Steer • Retractable High Visibility Seat Belt (75 mm/3 in) • Skylight • Machine 2-Point Lifting • Next Generation Standard LCD Monitor • Tilt-up Canopy • Storage Pocket UNDERCARRIAGE • Rubber Belt or Steel Track (230 mm/9 in wide) • Tie Downs on Track Frame • Expandable Undercarriage • Dozer Blade with Float
BOOM, STICK AND LINKAGES • One Piece Boom (1780 mm/70 in) • Front Shovel Capable (Pin-On/Manual Coupler/Hydraulic Coupler – not available in all regions) • Certified Lifting Eye (not available in all regions) • Standard Stick (960 mm/37.8 in) or Long Stick (1160 mm/45.7 in) • Thumb Ready (not available in all regions)
ELECTRICAL • Warning Horn • Maintenance Free Battery • 12 Volt Power Socket • Software (machine and monitor) • 12 Volt Battery • Boom Light, Halogen • Pattern Changer
OPERATOR ENVIRONMENT • Mirrors Left and Right
ELECTRICAL • Battery Disconnect • LED Front Lights • LED Boom Light • LED Front and Rear Lights • Product Link™
OTHER • Eco Drain • Guard, Canopy • Guard, Mesh • Quick Coupler Lines • Thumb Bracket (standard in some regions) • Secondary Auxiliaries • Bio Oil Capable • No Travel Pedals and Levers • Boom Lowering Check Valve • Stick Lowering Check Valve • Travel Alarm (standard in some regions) • Water Jacket Heater • Attachments including Buckets, Augers and Hammers
DIGGING BUCKETS - MINI EXCAVATOR
CAT MODELS: 301.7 CR3935lbs (1785kg)
COMPITITORS MODELS GEHL Z 17 GEN:23836lbs (1740kg)
Discover Quality & Reliability: Embrace the Elegance of Japanese Used Cars all around the world
Japanese used carsalmost exported to worldwide, despite the high cost of transport,japanese used carsbuy& sell due to lo
1. Excavators Excavatorsare imperative and broadly utilized equipment in development industry.Their common reason is to
The Mitsubishi Super great is a series of durable heavy duty commercial truck produced by the popular and one of the mos
When medium duty commercial are tight demand in the market and there were not a lot to compete the latest boosting deman
The Mitsubishi Canter is a light commercial vehicle which is available on the Japanese market since the year 1962. Mean
When Mitsubishi 1977 settled, VW Golf has a real bestseller. The young company responded quickly and one year later a co
We are proud member of Japan Used Motor Vehicle Exporters Association (JUMVEA), its makes us Unique trusted supplier from Japan, worldwide satisfied customers. The office of JUMVEA located in Tokyo but members are covering almost all area in Japan. As JUMVEA we also cover most of the countries in the world for the exportation of the used motor vehicles.
Higashi Ibaraki-gun, Ibaraki Machi, Nagaoka 4070-2 Ibaraki-ken 311-3116 Japan
+81 29-293-6822
+81 29 293 7088
info@mumtazintl.com
trucks@mumtazintl.com
machine@mutazintl.com
suvs@mumtazintl.com
We highly recommend paying via Paypal because it's easier and faster! Also, there's NO HANDLING FEE for Paypal payments!
For more details on how to make payments via Paypal, please click here
